EXTERIOR PROFESSIONAL PAINT
ULTRA SPEC EXTERIOR
Benjamin Moore Ultra Spec Exterior
Ultra Spec EXT Paint is a professional-quality exterior coating designed to meet the needs of professional painting contractors, facility managers, property managers, and specifiers.
Features
- Provides a breathable surface for maximum durability
- Low temperature application down to 4.4°C (40°F)
- Blister resistant
- Resistant to peeling and cracking
- Excellent hiding
- Resists new mildew formation
- Fast, simple clean up with warm soapy water
- Excellent colour retention
- Low VOC
- Engineered with Gennex® Colour Technology
Recommended for:
For exterior surfaces such as new or previously painted wood, hardboard siding, cured masonry, and unglazed brick.
Additional Features
- Available Colours: White and 1X, 2X, 3X, 4X bases
- Sheen (or Gloss): Flat, Low Lustre, Satin & Gloss
- Cleanup: Soap and Water
- Resin Type: 100% Acrylic Latex
- Recommended Use: Exterior
- Dry Time To Touch: 1 Hour*
- Recoat Time: 4 hours*
- VOC Level: 45-48 depending on sheen
- Available Sizes: 3.78L, 20 L containers
*Depending on environmental conditions
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
*For base specific and additional SDS sheets, please see the manufacturer’s website.
COROTECH COMMAND
Benjamin Moore Corotech Command
Extremely durable, single-component, multi-substrate waterborne acrylic urethane ideal for facility maintenance and property management applications where minimal maintenance disruptions and quick returns to service are required. This interior/exterior, UV-resistant acrylic urethane enamel provides superior adhesion and abrasion resistance on a variety of substrates.
Features
- Quick dry. Dries to touch in 15 minutes
- Return to service: vertical surfaces in just 1 hour; foot and forklift traffic-ready in 24 hours
- Flexible—resists cracking and peeling
- Block Resistant—fast, tack-free formula
- Interior/exterior
- Low-temperature application (35°F)
- Tenacious adhesion
- Fast, simple clean up with warm soapy water
- Engineered with Gennex® Colour Technology
Recommended for:
Galvanized and other non-ferrous metals, concrete, masonry, wood, fiberglass, in addition to properly prepared ferrous
metals, drywall and plaster. Corotech ® Command™ is designed for use on handrails, shelving, doors, floors, stairs,
ramps, safety markers, curbs, cabinets, awnings, shutters, molding, piping, and more.
Limitations
- Do not apply if material, substrate or ambient temperature is
below 1.7 °C (35 °F) – Relative humidity should be below 90% - Not intended as a whole house exterior paint over wood
- Not for immersion service
- Not recommended for coating over Kynar ® or similar finishes
- When applying over caulk, test a small area for compatibility
Additional Features
- Available Colours: Premixed White as well as thousands of custom tinted colours
- Sheen (or Gloss): Satin & Gloss
- Cleanup: Soap and Water
- Resin Type: Acrylic Urethane
- Recommended Use: Interior/Exterior
- Dry Time To Touch: 15 minutes*
- Recoat Time: 1 hour*
- Return to Service: 24 Hours*
- VOC Level: Maximum of 150
grams per litre VOC /VOS excluding water & exempt solvents - Available Sizes: 3.78L, 20 L containers
*Depending on environmental conditions
TECHNICAL DATA SHEETS
SAFETY DATA SHEETS
*For base specific and additional SDS sheets, please see the manufacturer’s website.
ULTRA SPEC MASONARY SATIN-FIL
Benjamin Moore Ultra Spec Masonary Acrylic Satin-Fil
Formulated to fill, seal, and finish in one application. Interior and exterior surfaces of cured cinder block, poured / pre-cast concrete, brick and other masonry structures, and incidental primed metal and wood. May be used on interior wallboard and cured plaster.
Features
- Beautiful and decorative satin finish
- Easy one-coat spray application.
- Withstands washing and scrubbing
- Fills small cracks and voids in concrete, cinder block and rough masonary
- Fast, simple clean up with warm soapy water
- LEEDS approved
- Can be tinted with up to 2 oz of colourant per gallon
- Engineered with Gennex® Colour Technology
Recommended for:
For interior and exterior surfaces of cinder block, poured/pre-cast concrete, brick and other masonry structures. May also be used on interior plaster and wallboard.
Additional Features
- Available Colours: White can be tinted with up to 2 fl oz of Gennex colourant
- Sheen (or Gloss): Satin
- Cleanup: Soap and Water
- Resin Type: Acrylic blended latex
- Dry Time to touch: 1 to 2 hours
- Recoat Time: 2 to 3 hours*
- Recommended Use: Interior/Exterior
- VOC Level: 32 g/l
- Available sizes: 18.9 L containers
*Depending on environmental conditions
TECHNICAL DATA SHEETS
TDS K452 Ultra Spec Satin-Fil (English)
SAFETY DATA SHEETS
SDS K452 Ultra Spec Stain-Fil (English)
*For base specific and additional SDS sheets, please see the manufacturer’s website.